• Fats, wax, grease, or oils of petroleum origin, whether emulsified or not
• Any liquids, solids, or gases that can create fire, explosion, or health hazard
• Any substances capable of causing obstructions or other interferences with proper operation of the sewer system
• Any pollutant that will cause a pass-through of pollutants to occur, or an interference with the City wastewater treatment facility’s operations or sludge use and/or disposal practices
• Any wastes, sludge, screenings, or other residues from business or industrial wastes, or the pretreatment of business or industrial wastes
• Detergents, surface active agents, or other substances that may cause excessive foaming in the municipal wastewater system
• Ammonia, ammonia salts, or other chelating agents that will produce metallic complexes that interfere with the municipal wastewater system
• Material considered a hazardous waste under the Resource Conservation and Recovery Act (R.C.R.A.), or materials that are toxic, hazardous, radioactive, or infectious medical wastes

• To incorporate any new or revised Federal, State, or local pretreatement standard or requirement.
• To incorporate any equipment modifications to existing vehicles or addition of new vehicles to fleet. All changes must be approved by the City prior to use of any new or modified equipment.
• Material or substantial alterations or additions to the discharger’s operation processes, discharge volume, or character that were not considered in drafting the effective permit.
• A change in any condition in either the industrial user or the Publicly Owned Treatment Works (POTW) that requires either a temporary or permanent reduction or elimination of the authorized discharge.
• Information indicating that the permitted discharge poses a threat to the City’s collection and treatment systems, POTW personnel, or the receiving waters.
• Violation of any terms or conditions of the permit.
• Misrepresentation or failure to disclose fully all relevant facts in the permit application or in any required reporting.
• To correct typographical or other errors in the permit.
• Upon request of the permittee, provided such request does not create a violation of any applicable requirements, standards, laws, or rules and regulations.

• Failing to submit a completed dump slip for each load brought in for disposal.
• Supplying false information on dump slip regarding content and/or source of load, amount discharged, or vehicle identification.
• Refusing reasonable and/or timely access to the user’s premises for the purpose of inspection, monitoring, or sampling.
• Failing to pay sewer charges.
• Failing to pay fines.
• Tampering with monitoring equipment.
• Failing to dispose of waste at the designated City facility.
• Failing to maintain a State of Oregon License for Sewage Disposal Service.
• Failing to reapply for a permit within 90 days prior to the expiration date of the existing permit and pay any applicable fees or charges.
• Failing to furnish or allow sampling of wastes, at the City’s request, prior to disposal of such wastes.
• Failing to comply with all conditions of this permit.
• Discharging any wastes that cause interference or damage to the POTW.

• The permittee has submitted a complete permit application at least 90 days prior to the expiration date of the user’s existing permit.
• The failure to reissue the permit, prior to the expiration of the previous permit, is not due to any act or failure to act on the part of the permittee.

1. Connect truck to station intake using a city provided hose.
2. Turn the station on “START,” and log in using your truck number and PIN number.
3. Open truck valve and begin discharging. Pressurizing your tank 7 to 12 psi will be required to completely empty tank.
4. When tank is empty, blow air through the hose to clean and to prevent wastewater from flowing back out when disconnecting the hose.
5. Close tank valve, turn the system off “DONE,” and take the printed receipt.
6. Disconnect hose from truck and then from the station intake.
7. Rinse the hose out, place back on rack, and clean up any spills.
8. If spillage outside of the containment area occurs, the driver must immediately notify Public Works Dispatch in Building #2. The spiller shall utilize their pumper truck to pick up the waste, so it can be discharged into the proper area. The septic hauler will be liable for any cleanup costs incurred due to release of septic wastes outside of the dump station containment area.
9. Leave a copy of your manifest in the drop box.

The last septic truck to use the dump facility will be held responsible for any spills not cleaned up. If you find spillage at the facility upon arrival, notify City staff before you hook up.